PC Monitor HDTV VGA Cable with Blister Packing for PS3/Wii

For PS3/Wii VGA Cable:
1)Transfer pictures from the Wii and PS3 console that can be displayed on a PC monitor or HDTV
2)The resolution of the pictures is 480P(640*480)when connecting with the Wii game console.The resolution of the pictures is controlled through the game console.
3)The resolution of the output pictures is 480P/720P/1080I/1080P when used with the PS3 game console.
4)The product will only work properly once the settings are set up properly with the Wii or PS3 game console.
5)The frequency of the output pictures is 50/60/75HZ6)Audio output signal port is compatible with speakers and a headpone.
6)Power consumption:150MA-200MA,supplied by game console

A.Instruction for Wii
Step 1.Insert the Wii AV MULTI OUT port of Wii gameconsole
Step 2.Insert the green plug in the output terminal of the TVVIDEO port
Step 3.Start Wii game console, turn on the TV,and the pictureof the Wii game console will appear on the TV screen.(Note: The pictures on the TV screen is white and black)
Step 4.Connect the VGA plug of PC monitor or HDTV to ourproduct,usually no pictures appear at the moment.But finally picture is shown,game can be started without settingthe console.
Step 5.Go ahead and perform with Wii game controller as below.
Step 6.Wii Option.
Step 7.Wii Settings.
Step 8.Screen.
Step 9.TV Resolution.
Step 10.EDTV Or HDTV(480P).
Step 11.Confirm.
Step 12.Wii game console will restart automatically,or turn on the power of Wii game console manually.
Step 13.The picture of Wii game console will appear on PC monitor.The setting is finished and games can be started.

B.Instruction for PS3
Step 1.Insert the PS3 AV plug into the port of PS3 AV MULTIOUT
Step 2.Insert the green plug in TV VIDEO port
Step 3.Connect and start PS3 game console,turn on the TV,then the color less starting picture of PS3 game console will appear on the TV screen
Step 4.Connect the VGA plug to the output port,usually there will be nopictures,but if any picture is show,game can be started without setting the console
Step 5.GO ahead to perform with PS3 game controller as instructed below
Step 6.Settings
Step 7.Display Settings
Step 8.Video Output Settings
Step 9.Component/D-Terminal
Step 10.Change,and prese "Enter"to the next step
Step 11.Select all or part of 480P,720P,1080I&1080P and right click the pad
Step 12.Pictures will appear on the PC monitor,and then click "YES",which should be done within 30 seconds, otherwise step 7,8,9,10 have to be set again
Step 13.After the above step,follow the instructions from the PC monitor to save the setting
Step 14.Set audio output port,select Scart or AV Multi
Step 15.Confirm
Step 16.There are twice Confirming and Saving while setting P3 console.After the setting,games can be played without restarting.